产品介绍

设备主要特性

1、本设备采取两只电池同时热封模式以提高生产效率；

2、本设备配置两套加热板，一套工位使用另外一套换型使用方便加热模具的快速更换；

3、本设备的热封上盖模具固定采取启动自动缩进模式，便于快速更换型号；

4、本设备的热封密合、移动定位等均采取伺服控制便于自动换型；、

5、本设备最大的优点：采用伺服密合热封的强度比传统的气缸密合模式更好。

设备主要参数

1、设备效率≥3只/分钟

2、适于塑壳范围：长：187——410mm

                 宽：127——176mm

                 高：170——250mm

3、设备尺寸：长：2500mm

             宽：2800mm

             高：1800mm

4、主要耗能：电源：220V / 380V / 440V * 3相* 50 / 60Hz（可选）

电耗：约69KW

              压缩空气：5-6Kg/cm²

Automatic numerical control heat sealing machine (1*6 type double station)

Product introduction

Main characteristics of equipment

1, the device adopts two batteries at the same time heat seal mode to improve production efficiency;

2, the equipment is equipped with two sets of heating plate, one set of station use another set of change to facilitate the rapid replacement of heating mold;

3, the equipment of the hot seal cover mold fixed to start automatic indent mode, easy to quickly replace the model;

4. The heat sealing and mobile positioning of the equipment are controlled by servo to facilitate automatic change; ,

5, the biggest advantage of this equipment: the strength of the servo sealing heat seal is better than the traditional cylinder sealing mode.

Main parameters of equipment

1, equipment efficiency ≥3 / min

2, suitable for plastic shell range: length: 187 -- 410mm

Width: 127 -- 176mm

Height: 170 -- 250mm

3, equipment size: length: 2500mm

Width: 2800mm

Height: 1800mm

4, the main energy consumption: Power supply: 220V / 380V / 440V * 3 phase * 50/60Hz (optional)

Power consumption: about 69KW

Compressed air: 5-6Kg/cm²