产品介绍

设备主要特性

1、本设备为极柱端子焊接机，主要通过火焰融化集群极柱与电池极柱套的密封连接；

2、本设备的焊枪升降采用伺服控制、左右、前后移动采取手动调节；

3、本设备的模具采取恒温循环水冷却，以避免模具温度过高烫坏塑壳等不良产品的出现。

设备主要参数

1、设备效率≥3只/分钟   

2、适于塑壳范围：长：187——510mm

                 宽：127——176mm

                 高：170——250mm

3、设备尺寸：长：1600mm

             宽：1100mm

             高：2000mm

4、主要耗能：电源：220V / 380V / 440V * 3相* 50 / 60Hz（可选）

电耗：约3KW

                压缩空气：5-6KGf/cm²

                循环水：2.5L/min

                氧气：300——450Kpa

                天然气：20——50Kpa

Terminal welding (type 1X6 simplex)

Product introduction

Main characteristics of equipment

1, the device is a pole terminal welding machine, mainly through the flame melting cluster pole and battery pole sleeve sealing connection;

2, the lifting of the welding torch of the equipment adopts servo control, left and right, forward and backward movement to take manual adjustment;

3, the mold of the equipment adopts constant temperature circulating water cooling to avoid the mold temperature is too high to burn the appearance of bad products such as plastic shel

Main parameters of equipment

1, equipment efficiency ≥3 / min

2, suitable for plastic shell range: length: 187 -- 510mm

Width: 127 -- 176mm

Height: 170 -- 250mm

3, equipment size: length: 1600mm

Width: 1100mm

Height: 2000mm

4, the main energy consumption: Power supply: 220V / 380V / 440V * 3 phase * 50/60Hz (optional)

Power consumption: about 3KW

Compressed air: 5-6KGf/cm²

Circulating water: 2.5L/min

Oxygen: 300 -- 450Kpa

Natural gas: 20 -- 50Kpa