产品介绍

设备主要特性

1、本设备适用于大电流释放的电池端子焊接，可实现端子焊接时自动补铅堆高极柱；

2、本设备有二个工位：实现自动添铅焊接；换型宽度自动调节；

3、本设备铅丝采取伺服控制定量供铅模式，精确度±1.0mm；

4、本设备同样适用不添铅产品（关闭供铅功能即可），一机多用；

5、本设备其他的烧焊原理以及烧焊特性等与端子烧焊机一致；

设备主要参数

1、设备效率≥2.5只/分钟   （添铅2.5-3只/分钟）

2、适于塑壳范围：长：187——520mm

                 宽：127——280mm

                 高：170——300mm

3、设备尺寸：长：2200mm

             宽：1500mm

             高：2000mm

4、主要耗能：电源：220V / 380V / 440V * 3相* 50 / 60Hz（可选）

电耗：约5KW

                压缩空气：5-6KGf/cm²

                循环水：2.5L/min

                氧气：300——450Kpa

                天然气：20——50Kpa

CNC lead terminal welding (double station)

Product introduction

Main characteristics of equipment

1. This device is suitable for welding of battery terminals with high current release, which can realize automatic filling of lead stacking pole during terminal welding;

2, the equipment has two stations: automatic lead welding;automatic change width adjustment；

3, the equipment adopts servo control quantitative lead supply mode, accuracy ±1.0mm;

4, this equipment is also suitable for products without lead (turn off the lead function), a multi-purpose machine;

5, the other welding principle and welding characteristics of the equipment are consistent with the terminal welding machine;

Main parameters of equipment

1. Equipment efficiency ≥2.5 PCS/min (add lead 2.5-3 PCS/min)

2, suitable for plastic shell range: length: 187 -- 520mm

Width: 127 -- 280mm

Height: 170 -- 300mm

3, equipment size: length: 2200mm

Width: 1500mm

Height: 2000mm

4, the main energy consumption: Power supply: 220V / 380V / 440V * 3 phase * 50/60Hz (optional)

Power consumption: about 5KW

Compressed air: 5-6KGf/cm²

Circulating water: 2.5L/min

Oxygen: 300 -- 450Kpa

Natural gas: 20 -- 50Kpa