产品介绍

一：主要特性

1、本装配线主要适用于热封型铅酸电池自动化装配使用;

2、本装配线标准配置人员4-5人；

3、若需扩大适用范围，则需增加铸焊夹具以及上下助力抓手给予配套。

二、主要设备名称

1、包封配组机 （根据要求可配缓存机）  2、COS-7自动铸焊机（自动上料、铸焊、入槽一体）

3、穿壁焊  4、热封机  5、端子烧焊机  6、气密检测机 7、输送带

三、设备主要参数

1、设备效率≥2只/分钟 （以200AH为标准）；

2、适用范围：12V80AH——12V200AH范围最佳：

3、整线尺寸：长：约4350mm

              宽：约5500mm

              高：3300mm

4、主要耗能：电耗：约305KW                      

压缩空气：6KGf/cm²

              冷却水：21L/min

              氧气：300——450Kpa

              天然气：20——50Kpa

COS-7 automatic casting and welding CNC assembly line

Product introduction

First: Main features

1. This assembly line is mainly suitable for the automatic assembly of heat-sealed lead-acid batteries

2. the assembly line standard configuration personnel 4-5 people;

3. if it is necessary to expand the scope of application, it is necessary to increase the casting welding fixture and the upper and lower power gripper to provide supporting.

Second： Name of main equipment

1. packaging assembly machine (according to requirements can be equipped with cache machine) 2。 COS-7 automatic casting and welding machine (automatic feeding, casting and welding, into the groove)3. through wall welding 4. heat sealing machine 5. terminal burning welding machine 6.airtight detection machine 7. conveyor belt

Third: the main parameters of the equipment

1. equipment efficiency ≥2 / min (200AH as the standard);

2. application scope: 12V80AH -- 12V200AH range is best:

3. the line size: length: about 4350mm

Width: about 5500mm

Height: 3300mm

4. the main energy consumption: power consumption: about 305KW

Compressed air: 6KGf/cm²

Cooling water: 21L/min

Oxygen: 300 -- 450Kpa

Natural gas: 20 -- 50Kpa