产品介绍

1、本设备适合PE/PVC/玻璃纤维隔板电池的化成加酸与出厂前的加酸使用；

2、本设备的灌酸模式采用重力灌酸法，酸量采取时间来定量控制；

3、本设备的酸量一致性采取真空抽酸调整，吸嘴根据电池高度设置同一水平，然后把多余的酸量进行抽取；

4、本设备的抽酸泵采用美国进口酸泵；

5、本设备的产品定量预计运行采用PLC控制系统；

6、本设备的原材料全部采取耐酸材质：316L不锈钢和PVC/PP；

7、能耗与气源：总功率：19KW;压缩空气：5-76Kg/cm²；

8、灌酸速度：根据灌酸量100AH以下为6只/分钟，100AH以上为4只/分钟；

9、设备尺寸和重量：L:2580mm，W:1780mm，H:1908mm；重量：600Kg；

10、可以根据需求配置灌酸、液面调整、液面检测一体机，用于出厂前灌酸；

11、液面检测采取光度检测法，单格间的误差控制在±1mm；配置不合格退出工位；

12、设备尺寸和重量：L:5200mm，W:1780mm，H:1908mm；重量：1000Kg。

Acid and liquid level adjusting machine & acid and liquid level testing machine

Product introduction

1, this equipment is suitable for PE/PVC/ glass fiber separator battery formation acid and acid before the factory use;

2. The irrigation mode of the equipment adopts gravity irrigation method, and the acid quantity is quantitatively controlled by time;

3. The consistency of the acid content of the equipment is adjusted by vacuum extraction, and the nozzle is set at the same level according to the height of the battery, and then the excess acid is extracted;

4. The acid pump of this equipment adopts the acid pump imported from the United States;

5, the equipment of the product quantitative expected operation using PLC control system;

6, the raw materials of this equipment are all acid-resistant materials: 316L stainless steel and PVC/PP;

7, energy consumption and air source: total power: 19KW; Compressed air: 5-76Kg/cm²;

8, acid irrigation speed: according to the amount of acid irrigation of 100AH below 6 / min, 100AH above 4 / min;

9, equipment size and weight: L:2580mm, W:1780mm, H:1908mm; Weight: 600Kg;

10, can be configured according to the needs of acid irrigation, liquid level adjustment, liquid level detection machine, used for acid irrigation before delivery;

11, liquid level detection adopts photometric detection method, the error between the single cell is controlled at ±1mm; The configuration is not qualified to exit the station;

12, equipment size and weight: L:5200mm, W:1780mm, H:1908mm; Weight: 1000Kg.