产品介绍

设备主要特性

1、本设备适用于聚丙烯（PP）材质电池壳中盖与底壳，中盖与盖片的合缝密封功能；

2、本设备采用特殊铝合金材质制作加热板与热封模具，热传递速度快、温度均匀、热封质量更可靠；

3、本设备的热封上盖模具固定采取启动自动缩进模式，便于快速更换型号；

4、本设备的热封密合、移动定位等均采取伺服控制便于自动换型；

5、本设备最大的优点：采用伺服密合热封的强度比传统的气缸密合模式更好。

设备主要参数

1、设备效率≥3只/分钟

2、适于塑壳范围：长：187——510mm

                 宽：127——176mm

                 高：170——250mm

3、设备尺寸：长：2300mm

             宽：1320mm

             高：2100mm

4、主要耗能：电源：220V / 380V / 440V * 3相* 50 / 60Hz（可选）

电耗：约10KW

              压缩空气：5-6Kg/cm²

Numerical control heat sealing machine (universal)

Product introduction

Main characteristics of equipment

1, this equipment is suitable for polypropylene (PP) material battery shell cover and bottom shell, middle cover and cover sheet joint sealing function;

2, the equipment uses special aluminum alloy material to make heating plate and heat sealing mold, heat transfer speed, uniform temperature, heat sealing quality is more reliable;

3, the equipment of the hot seal cover mold fixed to start automatic indent mode, easy to quickly replace the model;

4. The heat sealing and mobile positioning of the equipment are controlled by servo to facilitate automatic change;

5, the biggest advantage of this equipment: the strength of the servo sealing heat seal is better than the traditional cylinder sealing mode.

Main parameters of equipment

1, equipment efficiency ≥3 / min

2, suitable for plastic shell range: length: 187 -- 510mm

Width: 127 -- 176mm

Height: 170 -- 250mm

3, equipment size: length: 2300mm

Width: 1320mm

Height: 2100mm

4, the main energy consumption: Power supply: 220V / 380V / 440V * 3 phase * 50/60Hz (optional)

Power consumption: about 10KW

Compressed air: 5-6Kg/cm²