产品介绍

设备主要特性

1、本设备适用于聚丙烯（PP）材质电池壳中盖与底壳，中盖与盖片的合缝密封功能；

2、本设备采用特殊铝合金材质制作加热板与热封模具，热传递速度快、温度均匀、热封质量更可靠；

3、本设备更换模具与产品尺寸调整相对较为简单而精确，模具采取快插气源，整套更换模式，产品高度调整只需更换四个定位导柱即可；

设备主要参数

1、设备效率≥3只/分钟

2、适于塑壳范围：长：187——510mm

                 宽：127——176mm

                 高：170——250mm

3、设备尺寸：长：2300mm

             宽：1320mm

             高：2100mm

4、主要耗能：电源：220V / 380V / 440V * 3相* 50 / 60Hz（可选）

电耗：约10KW

              压缩空气：5-6Kg/cm²

Heat sealing machine (universal)

Product introduction

Main features of the device

1. this equipment is suitable for polypropylene (PP) material battery shell cover and bottom shell, middle cover and cover sheet joint sealing function;

2. the equipment uses special aluminum alloy material to make heating plate and heat sealing mold, heat transfer speed, uniform temperature, heat sealing quality is more reliable;

3. the equipment to replace the mold and product size adjustment is relatively simple and accurate, the mold adopts fast-insert air source, the whole set of replacement mode, product height adjustment only need to replace four positioning guide pillars;

The main parameters of the equipment

1. equipment efficiency ≥3 / min

2. suitable for plastic shell range: length: 187 -- 510mm

Width: 127 -- 176mm

Height: 170 -- 250mm

3. equipment size: length: 2300mm

Width: 1320mm

Height: 2100mm

4. the main energy consumption: Power supply: 220V / 380V / 440V * 3 phase * 50/60Hz (optional)

Power consumption: about 10KW

Compressed air: 5-6Kg/cm²